GS-4210-24UP4C 24-Port 10/100/1000T Ultra PoE + 4-Port Gigabit TP/SFP Combo Managed Switch
The GS-4210-24UP4C is a Gigabit Ultra PoE Managed Switch that can provide up to 60 watts of 802.bt Ultra PoE power via its 24 10/100/1000BASE-T interfaces. The unit also offers 4 additional Gigabit TP/SFP combo ports.
- Ports: 24 10/100/1000TX Ultra PoE + 4 100/1000TX TP/SFP
- Type: Managed
- PoE Ports: 24
- Standards: 802.3bt (Type 3)
- Total PoE Budget: 600 Watts (max.)
- Operating Temp: 0-50°C
- Power Consumption: Max. 330 Watts/1125 BTU
- Throughput: 41.67Mpps@64Bytes
- Reviews (0)
Ultra PoE Managed Switch with Advanced L2/L4 Switching and Security
The GS-4210-24UP4C is a Gigabit Ultra PoE Managed Switch that can provide up to 60 watts of 802.bt Ultra PoE power via its 24 10/100/1000BASE-T interfaces. The unit also offers 4 additional Gigabit TP/SFP combo ports. The unit features a total power budget of up to 600 watts to power a variety of applications. The managed switch also provides IPv6/IPv4 dual stack management as well as a built-in L2/L4 Gigabit switching engine. The GS-4210-24UP4C is a quick and cost-effective Ultra PoE networking solution for small businesses and enterprises.
60 Watts of Power for High Powered Devices
The GS-4210-24UP4C Ultra PoE solution adopts the IEEE 802.3at/af standard. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pin 1,2,3 and 6) or mid-span (Pin 4,5,7 and 8), the unit can provide up to 60 watts of power by using all the four pairs of standard Cat.5e/6 Ethernet cabling.The unit’s two PSE controllers can deliver power to both the data pairs and the spare pairs. The unit can be used to power the following PoE applications:
- PoE PTZ speed dome
- AIO (All-in-One) touch PC
- Remote digital signage display
- Other networking devices that utilize 60 watts of Ultra PoE Power
Built-in PoE Functions for Powered Devices Management
The managed PoE switch can be utilized for surveillance, wireless and VoIP networks for example. To facilitate the management of these networking applications, the GS-4210-24UP4C features the following PoE management functions:
- PD Alive Check
- Scheduled Power Recycling
- PoE schedule
- PoE Usage Monitoring
Automated Powered Device Alive Check
The GS-4210-24UP4C can be configured to monitor connected PD (Powered Device) status in real time via ping requests. If a connected PD stops working and responding, the GS-4210-24UP4C will resume the PoE port power and reactivate the PD. The unit will simplify network management with its automatic PoE port resetting feature.
Scheduled Power Recycling
The GS-4210-24UP4C allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. This reduces the likelihood of IP camera or AP crashing from buffer overflow.
Energy Efficient PoE Scheduling Feature
Even though the unit provides high power output it still is an energy-efficient device. With its “PoE scheduling” function, the units help administrators enable or disable PoE power feeding for each PoE port during specified time intervals. This function also increases security by powering off PDs that should not be in use during non-business hours.
Simple PoE Usage Monitoring
With its power usage chart in the web management interface, the GS-4210-24UP4C enables administrators to monitor the status of the power usage of the connected PDs in real time. These units simplify power monitoring and management.
Smart Fan Design for Silent Operation
The GS-4210-24UP4C is enclosed in a desktop-sized metal encasement and offers a silent operation. The effective ventilation system supports smart fan technology that automatically controls the speed of its built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-24UP4C offers optimal operation to operate reliably, stably and quietly in any environment.
IPv6/IPv4 Dual Stack Management
With the ability to support both IPv6 and IPv4 protocols, the GS-4210-24UP4C is a future proof unit that helps SMBs intending to upgrade to IPv6 by eliminating the need to replace the switch.
Robust Layer 2 Features
The GS-4210-24UP4C can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via link aggregation, administrators can form a high-speed trunk by combining multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.
Efficient Traffic Control
The GS-4210-24UP4C features robust QoS features and powerful traffic management to enhance services such as business-class data, voice and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. The unit provides optimal performance for VoIP and video stream transmission, and allows enterprises to fully control their network resources.
PLANET’s GS-4210-24UP4C offers a comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) to ensure maximum security. The unit can restrict network access by denying packets based on source and destination IP addresses, TCP/UDP ports or defined typical network applications. Its protection mechanism also includes 802.1X port-based user and device authentication which can be deployed with RADIUS to ensure the port level security and block unauthorized users. With its protected port function, communication between edge ports can be prevented to guarantee user-privacy. In addition, it’s Port security function allows a limiting of the number of networking devices of a given port.
Advanced Network Security
The GS-4210-24UP4C provides advanced security features such as DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping attacks and discards ARP packets with invalid MAC address. Network administrators can now construct highly-secure corporate networks in considerably less time and with less effort than before.
Friendly and Secure Management
For efficient management, the GS-4210-24UP4C is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-24UP4C offers an easy-to-use, platform-independent management and configuration facility. With standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. In addition, the GS-4210-24UP4C offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypts the packet content at each session.
Flexibility and Long-distance Extension Solution
With its four built-in mini-GBIC slots, the GS-4210-24UP4C support SFP auto-detection and dual speeds as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center located in distant locations. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Intelligent SFP Diagnosis Mechanism
The GS-4210-24UP4C also supports SFP-DDM (Digital Diagnostic Monitor) which can allows for the simple monitoring of real-time parameters of such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Optional SFP Modules:
– 1,000Mbps Gigabit Ethernet SFP Fiber Transceivers:
-100Mbps Fast Ethernet SFP Fiber Transceivers:
|Copper Ports||28 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port|
|SFP/mini-GBIC Slots||4 x 100/1000BASE-X SFP interface shared with port-25 to port-28
Supports 100/1000Mbps dual mode and DDM
|PoE Injector Port||24 ports with 802.3at/af/Ultra PoE injector function with port-1 to port-24|
|Address Table||8K entries|
|Shared Data Buffer||4.1 megabits|
|Flow Control||IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|Jumbo Frame||10K bytes|
|Reset Button||< 5 sec: System reboot
> 5 sec: Factory default
|LED||PWR, SYS, LNK/ACT, PoE-in-use, 1000, FAN1, FAN2, PWR FAN, PoE PWR|
|Power Requirements||100~240V AC, 50/60Hz, auto-sensing|
|Dimensions (W x D x H)||440 x 300 x 44.5 mm, 1U height|
|ESD Protection||Contact Discharge 4KV DC
Air Discharge 8KV DC
|Power Consumption/Dissipation||740 watts (max.)/2525 BTU|
|Fan||4 x smart fan|
|Power over Ethernet|
|PoE Standard||IEEE 802.3af/802.3at/Ultra PoE PSE|
|PoE Power Supply Type||End-span/Mid-span/UPoE|
|PoE Power Output||Per port 52V DC, 60 watts (max.)|
|Power Pin Assignment||End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
UPoE: 1/2(-), 3/6(+),4/5(+), 7/8(-)
|PoE Power Budget||600 watts (max.)|
|PoE Ability PD @ 15 watts||24 units|
|PoE Ability PD @ 30 watts||20 units|
|PoE Ability PD @ 60 watts||10 units|
|Layer 2 Functions|
|VLAN||802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Private VLAN (Protected port)
|Link Aggregation||IEEE 802.3ad LACP and static trunk
Supports 4 groups of 4-port trunk
|Spanning Tree Protocol||IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
|IGMP Snooping||IGMP (v2/v3) snooping
Up to 256 multicast groups
|MLD Snooping||MLD (v1/v2) snooping, up to 256 multicast groups|
|Access Control List||IPv4/IPv6 IP-based ACL/MAC-based ACL|
|QoS||8 mapping IDs to 8 level priority queues
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP field in IP packet
Traffic classification based, strict priority and WRR
|Security||IEEE 802.1X port-based authentication
Built-in RADIUS client to cooperate with RADIUS server
RADIUS/TACACS+ user access authentication
IP-MAC port binding
Static MAC address
DHCP Snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
IP source guard
|Basic Management Interfaces||Web browser; Telnet; SNMP v1, v2c
Firmware upgrade by HTTP/TFTP Protocol through Ethernet network
|Secure Management Interfaces||SSH, SSL, SNMP v3|
|SNMP MIBs||RFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (v2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIB
|Regulatory Compliance||FCC Part 15 Class A, CE, LVD|
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
|Operating||Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|Storage||Temperature: -20 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Device Downloads (Manuals, Quickstart Guides, Datasheets)
Planet Technology USA Device Warranty Information
Planet Technology USA honors its products that Planet and it's partners engineer and manufacture. Our products sold are of the highest standards available. All products come with a TWO year limited warranty on all products sold by directly by Planet Technology USA, unless specifically stated otherwise on our product documentation. This warranty period of two years applies from the ship date to all our products which are purchased legally and owned by the original customer. If you have purchased the product from a reseller you must contact the reseller directly. Should repairs fail to recover the product Planet Technology USA will replace the product with a similar product or a suitable replacement. Other information is as follows.
Planet Technology USA is not responsible for any other cost incurred.
All replacement units inherit the existing warranty.
Expedited return can be fulfilled for a predetermined fee.
An extended warranty may be purchased for eligible equipment.
If a product needs to be returned for RMA you can fill out the form HERE (RMA Page)
*Planet Technology USA assumes no responsibility for the risk of damage to any external devices (Devices that are not ours). It is the duty of the customer to check and make sure everything is compatible.
The Limited Warranty applies only to products sold directly by Planet Technology USA that can be identified as a Planet Technology USA product (by name, logo, purchase documentation). The Limited Warranty does not apply to (a) damage caused by accident, abuse, misuse, misapplication; (b) damage caused by unauthorized service performed by anyone who is not an authorized Planet Technology USA service specialist (c) a product or a part that has been modified without the written permission of Planet Technology USA; or (d) if any Planet Technology USA serial number has been removed or tampered.
Planet Technology USA warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
- AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period, Planet Technology USA shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced become the property of Planet Technology USA. Replacement products may be new or reconditioned. Planet Technology USA does not issue refunds or credit. Please contact the point-of-purchase for their return policies.
Planet Technology USA shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Planet Technology USA pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting Planet Technology USA within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all Planet Technology USA products. Products that are sent to Planet Technology USA for RMA service must have the RMA number marked on the outside of return packages and sent to Planet Technology USA prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE PLANET TECHNOLOGY USA PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT PLANET TECHNOLOGY USA'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PLANET TECHNOLOGY USA NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF PLANET TECHNOLOGY USA'S PRODUCTS.
PLANET TECHNOLOGY USA SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW PLANET TECHNOLOGY USA ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT PLANET TECHNOLOGY USA'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of California.
Some Planet Technology USA products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, PLANET TECHNOLOGY USA SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF PLANET TECHNOLOGY USA CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. NO PLANET TECHNOLOGY USA RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. PLANET TECHNOLOGY USA IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH PLANET TECHNOLOGY USA PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.
Shipping costs of products being returned are the responsibility of the customer. Cost of shipping products back to the customer will be paid by Planet Technology USA (Free ground shipping for USA - domestic customers only. International customers are responsible for shipping costs.) This warranty only applies to the customer whom purchased the product directly from Planet Technology USA.
Out of Warranty Service:
For products which are out of warranty, please call or fax in for a RMA number. Once the products for repair are received a quote will be generated for their repair. Customer approval must be obtained before work is begun in repairing or replacing the products. Once the products are repaired, payments must be made or sent for their repair costs before they are shipped back to customers. Shipping costs both to and from the customer are billed to the Customer for products which are out of warranty.