IGS-10020PT IP30 Industrial SNMP Switch 8-Port 10/100/1000Base-TX 802.3af PoE + 2-Port 100/1000FX (SFP) (-40 ~75 C)
The IGS-10020PT is a Modbus TCP Industrial 8-Port Gigabit 802.3af Switch with PoE capabilities.
- Ports: 8 10/100/1000TX + 2 100/1000X SFP
- Console: Yes
- PoE Ports: 8
- Max Watts per port: 15.4
- Standard: 802.3af
- Type: Managed
- Operating Temp.: -40 to 75°C
- Supports: IEEE 1588v2 Transparency, ERPS Ring, DIDO
Note: ALL Industrial Switches do NOT include a power supply. Click here to shop all Industrial Power Supply.
- Reviews (0)
- Warranty Information
The IGS-10020PT from Planet Technology is a Modbus TCP Industrial 8-Port Gigabit 802.3af PoE Switch that features a strong IP30 metal case that permits operation in environments that experience harsh conditions.The Modbus TCP switch supports IEEE 1588v2 Transparency, ERPS Ring, DIDO and static Layer 3 routing. With the design of the hard case, the unit features immunity against interference and disruptions that can be experienced in tough environmental conditions. Since the unit offers operation from -40 to 75 degrees C, it can be placed in virtually any environment. The IGS-10020PT makes DIN rail or wall mounting simpler than ever.
Quick Recovery with Redundant Ring Technology
The unit’s support of redundant ring technology and quick self-recovery ability allows it to efficiently halt interruptions and interference. The IGS-10020PT showcases Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and a redundant power supply system into the industrial automation network to make the reliability of the system even more stable. It also secures the industrial network connection with recover ability that is utilized to implement fault tolerant ring and mesh network architectures. If an interruption of the network occurs, the unit can recover under 50 minutes to bring the network back to operation.
PoE Functions for Simple Device Management
The IGS-10020PT showcases three PoE Management features:
- PD ALIVE Check
- Schedule Power Recycle
- SMTP/SNMP Trap Event Alert
- PoE Schedule
Status Check for Powered Devices
The IGS-10020PT can be simply configured to monitor the status of powered devices connected to the unit with a ping action. If a powered device stops working, the IGS-10020PT will restart the PoE port power and bring the device back to operation. This increases network stability through the PoE port’s ability to reset the powered device’s power source.
Energy Efficient PoE Schedule
The IGS-10020PT follows energy efficiency by managing power supply in addition to providing high watt power. The built-in “PoE schedule” feature on the unit allows users to enable or disable the feeding of PoE power to PoE ports at set time intervals.
External Alarm Features
The IGS-10020PT features the Digital Input and Digital Output feature. The alarm allows users to utilize the Digital Input feature to determine and log the status of external devices and notify users. The Digital Output also has the ability to alarm users in the case of a power failure or if there is a port link down or port link up.
Superior Layer 2 Features
The IGS-10020PT can be simply programmed for the following advanced switch management features including dynamic port link aggregation, Q-in-Q VLAN, private VLAN, rapid spanning tree protocol, layer 2 to layer 4 QoS, bandwidth control and IGMP/MLD snooping. The unit showcases 802.1Q tagged VLAN with a maximum of 255 for VLAN groups. The IGS-10020PT permits the operation of a high-speed trunk that includes multiple ports with the support of connection fail-over.
The IGS-10020PT offers efficient management with console, web and SNMP management interfaces. The web management interface makes the unit a extremely user-friendly platform for management and configuration. The IGS-10020PT unit has the ability to support SNMP and can be managed with standard of SNMP v1 and v2 management software. The IGS-10020PT also supports text-based management through Telnet and the console port. In addition, the IGS-10020PT provides secure management with the support of SSH, SSL and SNMPv3 connection.
Dependable Security Features
The IGS-10020PT provides layer 2 to layer 4 access control list (ACL) to make the network even more secure. The unit restricts network access by denying packets based on their source and destination IP address, TCP/UDP port number or defined network applications The unit’s security features include user and device authentication that is 802.1x Port-based and MAC-based. In addition, the private VLAN function halts communication between edge ports to make sure users are secure. The IGS-10020PT offers DHCP Snooping, IP Source Guard and Dynamic ARP Inspection features that stop attacks of prevent IP snooping. It also removes ARP packets with invalid MAC addresses.
Versatile Solution for Extension
The IGS-10020PT features two mini-GBIC slots that support dual speed 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Users have the ability to select the right SFP transceiver based on the transmission distance and speed. Users can extend distance from 550 meters to 2km with Multi-Mode fiber and up to 10/20/30/40/50/70/120 kilometers with Single-Mode fiber or WDM fiber.
Simple Solution for Camera and NVR Systems
The IGS-10020PT offers 8 10/100/1000Mbps 802.3af PoE ports that provides enough PoE power for 8 PoE IP cameras simultaneously. With the 2-Port 100/1000Base-X SFP interfaces, the IGS-10020PT connects efficiently to the core fiber switch and sends video stream to the main monitor center. With innovative switch architecture, the IGS-10020PT manages recorded video files from IP cameras to save into the NVR systems. In addition, users can monitor and manage the NVR systems in the local LAN and remotely through Internet.
Optional SFP Modules:
– 1000Mbps Gigabit SFP Fiber Transceiver Extended Temperature (-40 to 75°C)
– 100Mbps Fast SFP Fiber Transceiver Extended Temperature (-40 to 75°C)
Optional DIN Rail Power Supply Units:
|Copper Ports||8 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports|
|SFP/mini-GBIC Slots||2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)
Compatible with 100BASE-FX SFP
|Console||1 x RJ45-to-RS-232 serial port (115200, 8, N, 1)|
|Switch Fabric||20Gbps / non-blocking|
|Throughput (packet per second)||14.8Mpps@ 64Bytes packet|
|Address Table||8K entries, automatic source address learning and ageing|
|Shared Data Buffer||4Mbits|
|Flow Control||IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|Reset Button||< 5 sec: System reboot
> 10 sec: factory default
|ESD Protection||6KV DC|
|EFT Protection||6KV DC|
|Enclosure||IP30 aluminum case|
|Installation||DIN rail kit and wall-mount kit|
|Connector||Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
|Alarm||One relay output for power fail. Alarm Relay current carry ability: 1A @ DC 24V|
|DI/DO||2 Digital Input (DI):
Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.2 Digital Output (DO):
Open collector to 24VDC, 100mA max.
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring Owner (Green)
Per 10/100/1000T RJ45 Ports:
PoE In-Use (Orange)
Per SFP Interface:
|Dimensions (W x D x H)||152 x 107x 72 mm|
|Power Requirements||DC 48V|
|Power Consumption||31.9 watts / 108.78BTU (Full loading without PoE function)
161.9 watts / 522.08BTU (Full loading with PoE function)
|Power Over Ethernet|
|PoE Standard||IEEE 802.3af Power over Ethernet / PSE|
|PoE Power Supply Type||End-span|
|PoE Power Output||Per Port 48V DC, 350mA . Max. 15.4 watts|
|Power Pin Assignment||1/2(+), 3/6(-)|
|PoE Power Budget||130W maximum (depending on power input)|
|Max. number of Class 2 PD||8|
|Max. number of Class 3 PD||8|
|Layer 2 Function|
|Basic Management Interfaces||Console, Telnet, Web Browser, SNMP v1, v2c|
|Secure Management Interfaces||SSH, SSL, SNMP v3|
|Port Configuration||Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable / enable
Power saving mode control
|Port Status||Display each port’s speed duplex mode, link status, flow control status,
auto negotiation status, trunk status
|Port Mirroring||TX / RX / both
1 to 1 monitoring
|VLAN||802.1Q tagged based VLAN, up to 255 VLAN groups
Private VLAN Edge (PVE)
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
|Link Aggregation||IEEE 802.3ad LACP / static trunk
Supports 5 trunk groups with 8 ports per trunk
|QoS||Traffic classification based, Strict priority and WRR
8-level priority for switching
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP packet
|IGMP Snooping||IGMP (v1/v2/V3) Snooping, up to 255 multicast groups
IGMP Querier mode support
|MLD Snooping||MLD (v1/v2) Snooping, up to 255 multicast groups
MLD Querier mode support
|Access Control List||IP-based ACL / MAC-based ACL
Up to 123 entries
|Bandwidth Control||Per port bandwidth control
|SNMP MIBs||RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
|Layer 3 Function|
|IP Interfaces||Max. 8 VLAN interfaces|
|Routing Table||Max. 32 routing entries|
|Routing Protocols||IPv4 software static routing
IPv6 software static routing
|Regulation Compliance||FCC Part 15 Class A, CE|
|Stability Testing||IEC60068-2-32 (free fall)
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
|Operating Temperature||-40 ~ 75 degrees C|
|Storage Temperature||-40 ~ 85 degrees C|
|Humidity||5 ~ 95% (non-condensing)|
Device Downloads (Manuals, Quickstart Guides, Datasheets)
PlanetechPRO® Limited Lifetime Warranty
Terms and Conditions
To learn more about the PlanetechPRO® Lifetime Warranty, read more in the terms and conditions.
Eligible Product List
In order to determine if your product is a PlanetechPRO® Lifetime Warranty product, check the list below.
In order to receive the PlanetechPRO® Lifetime Warranty, you MUST register. Failing to do so will result in the default warranty of five (5) years. The registration form must be filled out and mailed 30 days from the purchase date.
Planet Technology USA Device Warranty Information
Planet Technology USA honors its products that Planet and it's partners engineer and manufacture. Our products sold are of the highest standards available. All products come with a TWO year limited warranty on all products sold by directly by Planet Technology USA, unless specifically stated otherwise on our product documentation. This warranty period of two years applies from the ship date to all our products which are purchased legally and owned by the original customer. If you have purchased the product from a reseller you must contact the reseller directly. Should repairs fail to recover the product Planet Technology USA will replace the product with a similar product or a suitable replacement. Other information is as follows.
Planet Technology USA is not responsible for any other cost incurred.
All replacement units inherit the existing warranty.
Expedited return can be fulfilled for a predetermined fee.
An extended warranty may be purchased for eligible equipment.
If a product needs to be returned for RMA you can fill out the form HERE (RMA Page)
*Planet Technology USA assumes no responsibility for the risk of damage to any external devices (Devices that are not ours). It is the duty of the customer to check and make sure everything is compatible.
The Limited Warranty applies only to products sold directly by Planet Technology USA that can be identified as a Planet Technology USA product (by name, logo, purchase documentation). The Limited Warranty does not apply to (a) damage caused by accident, abuse, misuse, misapplication; (b) damage caused by unauthorized service performed by anyone who is not an authorized Planet Technology USA service specialist (c) a product or a part that has been modified without the written permission of Planet Technology USA; or (d) if any Planet Technology USA serial number has been removed or tampered.
Planet Technology USA warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
- AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period, Planet Technology USA shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced become the property of Planet Technology USA. Replacement products may be new or reconditioned. Planet Technology USA does not issue refunds or credit. Please contact the point-of-purchase for their return policies.
Planet Technology USA shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Planet Technology USA pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting Planet Technology USA within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all Planet Technology USA products. Products that are sent to Planet Technology USA for RMA service must have the RMA number marked on the outside of return packages and sent to Planet Technology USA prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE PLANET TECHNOLOGY USA PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT PLANET TECHNOLOGY USA'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PLANET TECHNOLOGY USA NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF PLANET TECHNOLOGY USA'S PRODUCTS.
PLANET TECHNOLOGY USA SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW PLANET TECHNOLOGY USA ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT PLANET TECHNOLOGY USA'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of California.
Some Planet Technology USA products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, PLANET TECHNOLOGY USA SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF PLANET TECHNOLOGY USA CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. NO PLANET TECHNOLOGY USA RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. PLANET TECHNOLOGY USA IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH PLANET TECHNOLOGY USA PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.
Shipping costs of products being returned are the responsibility of the customer. Cost of shipping products back to the customer will be paid by Planet Technology USA (Free ground shipping for USA - domestic customers only. International customers are responsible for shipping costs.) This warranty only applies to the customer whom purchased the product directly from Planet Technology USA.
Out of Warranty Service:
For products which are out of warranty, please call or fax in for a RMA number. Once the products for repair are received a quote will be generated for their repair. Customer approval must be obtained before work is begun in repairing or replacing the products. Once the products are repaired, payments must be made or sent for their repair costs before they are shipped back to customers. Shipping costs both to and from the customer are billed to the Customer for products which are out of warranty.