IPOE-171S Industrial Single-Port 10/100/1000Mbps Ultra PoE Splitter
PLANET’s IPOE-171S is an Industrial grade single-port 10/100/1000Mbps Ultra Power over Ethernet splitter.
- Interface: 1 PoE In, 1 Data Out, 1 DC Out Plug, 1 DIP-Switch
- Power Output: 12V/24V DC @ 110W PoE Input, 12V-24V DC @ 75W PoE Input
- Standard: 802.3bt (Type 3)
- Operating Temperature: -40 to 75°C
- Ethernet Data Rate: 10/100/1000Mbps
- End-Span/Mid-Span: End-Span + Mid-Span
Note: ALL Industrial Switches do NOT include a power supply. Click here to shop all Industrial Power Supply.
- Reviews (0)
- 5 Year Warranty
Highly Convenient and Robust Industrial PoE Splitter
PLANET’s IPOE-171S is an Industrial grade Ultra Power over Ethernet Splitter which delivers Ethernet data with a maximum of 75-watts PoE power from Ultra PoE PSE (Power Source Equipment) over UTP cables. The splitter separates digital data and power stream into selectable 12V or 24V DC, with a maximum of 55-watts power output to non-PoE powered Ethernet devices. It supports passive 10/100/1000Mbps Ethernet connection and distances up to 100 meters. To fulfill growing industrial applications, the IPOE-171S is designed to work under the operating temperature range from -40 to 75°C. The IPOE-171S is an ideal solution to directly transfer power to a high power device without the need to install additional power outlets or electrical cabling.
Quick and Easy Ultra Power PoE Network Deployment
Many high-powered Ethernet devices are not designed with PoE PD (Powered Device) capability to accept power over UTP cable. High-powered devices can only get power through the DC jack while the RJ45 interfaces accept only Ethernet data. The IPOE-171S functions as an Ultra PoE PD (Powered Device) and splits the combined data and power stream into two separate cords to offer more non-PoE applications, such as:
- PTZ speed dome
- AIO (All-in-One) touch PC and thin-client
- Digital signage and display tablet
- Other network devices that need higher power to work normally
When paired with the IPOE-171S, non-PoE Ethernet devices can immediately become PoE-ready without any modification required on their side. The IPOE-171S eliminates the cost for additional AC wiring and reduces installation time.
Innovative, Selectable DC Power Output Voltage
Via the innovative 12/24 volt DIP switch on the front panel, the IPOE-171S can supply either 24V DC power to industrial equipment or 12V DC output to the common network devices. This highly increases the flexibility of the product applications.
Dual Power Output Capability
The IPOE-171S can satisfy not only single power-hungry equipment but also able to share the 55 watts output power to two non-PoE Ethernet devices simultaneously through a 4-pin terminal block. The two power outputs can be applied as shown below:
- IP camera (Power 1) + Outdoor housing with fan and heater (Power 2)
- IP camera (Power 1) + Pan & Tilt motor (Power 2)
- Analog camera (Power 1) + IP video server (Power 2)
Environmentally Hardened Design
With compact, slim type IP30 industrial case protection, the space-saving Industrial Ultra PoE Splitter can be placed in almost any difficult environment. It allows either DIN rail or wall mounting for efficient use of cabinet space. The IPOE-171S is able to operate under the temperature ranges from -40 to 75°C. This makes it an ideal product for co-working with an industrial high power injector which can feed the power to non-PoE devices up to 100 meters (328 feet) away in harsh environments.
|Interface||■ PoE Input Port:
1 x 10/100/1000 BASE-T RJ45
“PoE (Data + Power) In”
■ Data Output Port:
1 x 10/100/1000 BASE-T RJ45
■ DC Out Plug Connector:
1 removable 4-pin terminal block
12V DC /24V DC output voltage
|LED Indicator||■ Power Ready: Green
■ 802.3at PoE+ In: Green
■ Ultra PoE or 802.3bt PoE in: Green
■ DC 12V: Orange
■ DC 24V: Green
|Network Cable||■ Ultra PoE (60W/75W/95W): 4-pair UTP Cat5e, 6, up to 100m (328ft)
■ 802.3at PoE+: 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft)
|Dimensions (W x D x H)||32 x 87 x 132 mm|
|Installation||DIN rail/wall mountable|
|Enclosure||IP30 metal case|
|Power Requirements||50 ~ 56V DC PoE|
|Power Output (at 56V DC Input)||■ 110-watt PoE input:
12V DC, 8A (max.)
24V DC, 4A (max.)
■ 75-watt PoE input:
12V DC, 4.5A (max.)
24V DC, 2.3A (max.)
|Power Consumption||■ System on with PoE input:
■ Ethernet full loading without DC output:
■ Full loading with maximum 12V DC, 4A output:
■ Full loading with maximum 12V DC, 8A output:
110 watts (110-watt PoE in)
|Power over Ethernet|
|PoE Standard||802.3bt Type 3/Type 4 Power over Ethernet,
4-pair 802.3at PoE+
|Power Output||DC 12V/24V by DIP switch control|
|PoE Power Supply Type||end-span + mid-span
|Power Pin Assignment||1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or 1/2(-), 3/6(+); 4/5(+), 7/8(-)|
|Standards Compliance||IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3af Power over Ethernet
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Operating Temperature||-40~ 75 degrees C|
|Storage Temperature||-40~ 85 degrees C|
|Humidity||5 ~ 95% (non-condensing)|
Device Downloads (Manuals, Quickstart Guides, Datasheets)
PlanetechPRO® Limited Lifetime Warranty
Terms and Conditions
To learn more about the PlanetechPRO® Lifetime Warranty, read more in the terms and conditions.
Eligible Product List
In order to determine if your product is a PlanetechPRO® Lifetime Warranty product, check the list below.
In order to receive the PlanetechPRO® Lifetime Warranty, you MUST register. Failing to do so will result in the default warranty of five (5) years. The registration form must be filled out and mailed 30 days from the purchase date.
Planet Technology USA Device Warranty Information
Planet Technology USA honors its products that Planet and it's partners engineer and manufacture. Our products sold are of the highest standards available. All products come with a TWO year limited warranty on all products sold by directly by Planet Technology USA, unless specifically stated otherwise on our product documentation. This warranty period of two years applies from the ship date to all our products which are purchased legally and owned by the original customer. If you have purchased the product from a reseller you must contact the reseller directly. Should repairs fail to recover the product Planet Technology USA will replace the product with a similar product or a suitable replacement. Other information is as follows.
Planet Technology USA is not responsible for any other cost incurred.
All replacement units inherit the existing warranty.
Expedited return can be fulfilled for a predetermined fee.
An extended warranty may be purchased for eligible equipment.
If a product needs to be returned for RMA you can fill out the form HERE (RMA Page)
*Planet Technology USA assumes no responsibility for the risk of damage to any external devices (Devices that are not ours). It is the duty of the customer to check and make sure everything is compatible.
The Limited Warranty applies only to products sold directly by Planet Technology USA that can be identified as a Planet Technology USA product (by name, logo, purchase documentation). The Limited Warranty does not apply to (a) damage caused by accident, abuse, misuse, misapplication; (b) damage caused by unauthorized service performed by anyone who is not an authorized Planet Technology USA service specialist (c) a product or a part that has been modified without the written permission of Planet Technology USA; or (d) if any Planet Technology USA serial number has been removed or tampered.
Planet Technology USA warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
- AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period, Planet Technology USA shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced become the property of Planet Technology USA. Replacement products may be new or reconditioned. Planet Technology USA does not issue refunds or credit. Please contact the point-of-purchase for their return policies.
Planet Technology USA shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Planet Technology USA pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting Planet Technology USA within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all Planet Technology USA products. Products that are sent to Planet Technology USA for RMA service must have the RMA number marked on the outside of return packages and sent to Planet Technology USA prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE PLANET TECHNOLOGY USA PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT PLANET TECHNOLOGY USA'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PLANET TECHNOLOGY USA NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF PLANET TECHNOLOGY USA'S PRODUCTS.
PLANET TECHNOLOGY USA SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW PLANET TECHNOLOGY USA ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT PLANET TECHNOLOGY USA'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of California.
Some Planet Technology USA products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, PLANET TECHNOLOGY USA SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF PLANET TECHNOLOGY USA CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. NO PLANET TECHNOLOGY USA RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. PLANET TECHNOLOGY USA IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH PLANET TECHNOLOGY USA PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.
Shipping costs of products being returned are the responsibility of the customer. Cost of shipping products back to the customer will be paid by Planet Technology USA (Free ground shipping for USA - domestic customers only. International customers are responsible for shipping costs.) This warranty only applies to the customer whom purchased the product directly from Planet Technology USA.
Out of Warranty Service:
For products which are out of warranty, please call or fax in for a RMA number. Once the products for repair are received a quote will be generated for their repair. Customer approval must be obtained before work is begun in repairing or replacing the products. Once the products are repaired, payments must be made or sent for their repair costs before they are shipped back to customers. Shipping costs both to and from the customer are billed to the Customer for products which are out of warranty.