NOTICE: We will continue processing orders as usual despite the COVID-19 situation until further notice. For Express orders (Overnight, 2nd days and 3 days) cut-off is 11:30AM PDT. For Ground orders cut-off is 1:30PM PDT.
The IGS-500T Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch, features an IP30-rated rugged, compact case and a wide-ranging redundant power system (12~48V DC or 24V AC).
Compact Size for More Practicability and Convenience
The IGS-500T Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch, features 5 1000Mbps auto-negotiation ports, IP30-rated rugged compact case and a wide-ranging redundant power system (12~48V DC or 24V AC). The IGS-500T is able to operate in harsh environments with operating temperature ranging from -40 to 75°C. With the rise of IIoT (Industrial Internet of Things) infrastructures, the IGS-500T's Plug and Play feature is especially designed to make the deployment of industrial networks easy. Besides, it is stable and reliable when it comes to fast data and power transmission.
Low Power Consumption for Green Networking
The IGS-500T provides link-on cable length power saving and link-down power saving methods in order to be a green network. These features allow the IGS-500T to consume very low power in full load operation mode, which helps conserve energy effectively but maintains high performance efficiently. With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE) Protocol, the IGS-500T can automatically detect cable link status and network traffic, and thus is able to adjust power consumption accordingly. It enables the switch to consume less power when it is less active.
Dual Power Input for High Availability Network System
The IGS-500T features a strong dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) incorporated into customer's automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the IGS-500T via power supply 2 alternatively without any loss of operation.
High Switch Performance
The IGS-500T offers a high-performance switch architecture. With 5 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 10Gbps and the 4K MAC address table, the IGS-500T can perform wire-speed packet transfer without the risk of packet loss. The flow control function enables the IGS-500T to provide fast and reliable data transfer.
Plug and Play
All of the RJ45 copper interfaces in the IGS-500T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Hardware Specifications
Copper Ports
5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation
Connector
Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm
Provides one relay output for power failure Alarm relay current carry ability: [email protected] 24V
LED
3 x LED for system and power: – Green: DC Power 1 – Green: DC Power 2 – Red: Power Fault 2 x LED for each copper port -Green: 1000Mbps LNK/ACT – Orange:10/100Mbps LNK/ACT
ESD Protection
6KV
EFT Protection
6KV
Power Requirements
12 to 48V DC, redundant power input with polarity reverse protection, 24V AC power support
Power Consumption / Dissipation
3.6 watts/12.35BTU
Installation
DIN-rail kit and wall-mount ear
Enclosure
IP30 metal case
Dimensions (W x D x H)
70 x 104 x 30 mm
Weight
252g
Switch Specifications
Switch Processing Scheme
Store-and-Forward
Address Table
4K entries
Buffer Memory
1M bits on-chip buffer memory
Flow Control
Back pressure for half duplex IEEE 802.3x pause frame for full duplex
IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Class of Service
In order to receive the PlanetechPRO® Lifetime Warranty, you MUST register. Failing to do so will result in the default warranty of five (5) years. The registration form must be filled out and mailed 30 days from the purchase date.
PLANETs PWR-15-12 industrial power supply is specially designed for the harsh working environment where sometimes it is hard to find a suitable DC voltage power source.
Input Voltage AC: 85-264VAC (277VAC operational)
Input Voltage DC: 120-370VDC (390VDC operational)
Power Output: 15 Watts, 12V, 1.25A
Operating Temperature: -30 to 70°C
PWR-15-12
$19.00
PLANETs PWR-15-12 industrial power supply is specially designed for the harsh working environment where sometimes it is hard to find a suitable DC voltage power source.
High Switch Performance
