Industrial PoE Injector
Highly Convenient and Robust Industrial PoE Splitter
PLANET’s IPOE-171S is an Industrial grade Ultra Power over Ethernet Splitter which delivers Ethernet data with a maximum of 75-watts PoE power from Ultra PoE PSE (Power Source Equipment) over UTP cables. The splitter separates digital data and power stream into selectable 12V or 24V DC, with a maximum of 55-watts power output to non-PoE powered Ethernet devices. It supports passive 10/100/1000Mbps Ethernet connection and distances up to 100 meters. To fulfill growing industrial applications, the IPOE-171S is designed to work under the operating temperature range from -40 to 75°C. The IPOE-171S is an ideal solution to directly transfer power to a high power device without the need to install additional power outlets or electrical cabling.
Quick and Easy Ultra Power PoE Network Deployment
Many high-powered Ethernet devices are not designed with PoE PD (Powered Device) capability to accept power over UTP cable. High-powered devices can only get power through the DC jack while the RJ45 interfaces accept only Ethernet data. The IPOE-171S functions as an Ultra PoE PD (Powered Device) and splits the combined data and power stream into two separate cords to offer more non-PoE applications, such as:
- PTZ speed dome
- AIO (All-in-One) touch PC and thin-client
- Digital signage and display tablet
- Other network devices that need higher power to work normally
When paired with the IPOE-171S, non-PoE Ethernet devices can immediately become PoE-ready without any modification required on their side. The IPOE-171S eliminates the cost for additional AC wiring and reduces installation time.
Innovative, Selectable DC Power Output Voltage
Via the innovative 12/24 volt DIP switch on the front panel, the IPOE-171S can supply either 24V DC power to industrial equipment or 12V DC output to the common network devices. This highly increases the flexibility of the product applications.
Dual Power Output Capability
The IPOE-171S can satisfy not only single power-hungry equipment but also able to share the 55 watts output power to two non-PoE Ethernet devices simultaneously through a 4-pin terminal block. The two power outputs can be applied as shown below:
- IP camera (Power 1) + Outdoor housing with fan and heater (Power 2)
- IP camera (Power 1) + Pan & Tilt motor (Power 2)
- Analog camera (Power 1) + IP video server (Power 2)
Environmentally Hardened Design
With compact, slim type IP30 industrial case protection, the space-saving Industrial Ultra PoE Splitter can be placed in almost any difficult environment. It allows either DIN rail or wall mounting for efficient use of cabinet space. The IPOE-171S is able to operate under the temperature ranges from -40 to 75°C. This makes it an ideal product for co-working with an industrial high power injector which can feed the power to non-PoE devices up to 100 meters (328 feet) away in harsh environments.