SGS-6340-16XR Layer 3 16-Port 10GBASE-SR/LR SFP+ Stackable Managed Switch (100~240V AC, 36~60V DC)
PLANET’s SGS-6340-16XR is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance via its Layer 3 10Gigabit static routing with 16 SFP+ fiber interfaces delivered in a rugged case.
- Ports: 16 10G Base-SR/LR SFP+
- Type of Switch: Layer 3 Managed
- Operating Temp: 0 to 50°C
- Switch Fabric: 320Gbps/ non-blocking
- Power Consumption: Max. 27 watts / 93BTU
- Throughput: 238Mpps
- Reviews (0)
Powerful All-port 10Gbps Solution for Enterprise Core Networks
PLANET’s SGS-6340-16XR is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance with 16 SFP+ fiber interfaces and is delivered in a rugged case. The administrator can choose between SFP/SFP+ transceivers depending on the required transmission distance or speed to extend the 10G network. The SGS-6340-16XR can handle large amounts of data due to its 320Gbps switching fabric.
AC and DC Redundant Power to Ensure Continuous Operation
The SGS-6340-16XR is equipped with one 100~240V AC power supply unit and one additional -48 ~ -60V DC power supply unit for redundant power supply installation. A redundant power system is also provided to enhance the reliability with either an AC or DC power supply unit. The redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity. The unit can act as a telecom level device with the -48 ~ -60V DC power supply.
Layer 3 Routing Support
The switch enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, the RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops allowed for the RIP is 15. The OSPF is an interior dynamic routing protocol for autonomous system based on link-state. The protocol creates a link-state database by exchanging link-states among Layer 3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.
The SGS-6340-16XR is capable of providing non-blocking switch fabric and wire-speed throughput as high as 320Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
Abundant IPv6 Support
The SGS-6340-16XR provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR (Weighted Round Robin) and RADIUS authentication. The SGS-6340-16XR thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.
Excellent and Secure Traffic Control
The SGS-6340-16XR is loaded with powerful traffic management and WRR features to enhance services offered by enterprises and campuses. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant units, multi-business units, Telco’s, or network service applications.
The ACL policies supported can classify the traffic by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic.
The SGS-6340-16XR also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users. Thus, the SGS-6340-16XR empowers enterprises and campuses to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission.
Robust Layer 2 Features
The switch can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. It also supports 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol. The VLAN groups allowed to be on the SGS-6340-16XR will be maximally up to 256. By supporting port aggregation, the SGS-6340-16XR allows the operation of a high-speed trunk combined with multiple ports. It enables up to 128 groups for trunking with a maximum of 8 ports for each group.
IP Stacking Management
The SGS-6340-16XR supports IP stacking functions that helps network managers to easily configure up to 24 switches in the same series. You can configure these switches via one single IP address instead of connecting them individually. The IP Stacking technology groups the SGS-6340 Series together to enable centralized management through a single unit.
Efficient and Secure Management
For efficient management, the SGS-6340-16XR Managed 10Gigabit Switch is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6340-16XR offers an easy-to-use, platform-independent management and configuration facility. The SGS-6340-16XR supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software.
The SGS-6340-16XR offers Cisco-like commands via Telnet or console port, which can reduce learning time. Moreover, the SGS-6340-16XR offers secure remote management by supporting SSH connection which encrypts the packet content at each session.
Flexibility and Extension Solution
The SGS-6340-16XR provides 16 1G/10Gbps dual speed SFP+ Fiber ports. Each of the SFP+ slots supports Dual-Speed, 10GBASE-SR/LR or 1000BASE-SX/LX. Therefore, the administrator can flexibly choose the suitable SFP/SFP+ transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 10km (multi-mode fiber) or up to 10/20/30/40/50/70/120 km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Optional SFP Modules:
– 10,000Mbps 10G Ethernet SFP+ Fiber Transceivers:
– 1,000Mbps Gigabit Ethernet SFP Fiber Transceivers:
-100Mbps Fast Ethernet SFP Fiber Transceivers:
|SFP+ Slots||16 10GBASE-SR/LR SFP+ interface
Compatible with 1000BASE-SX/LX/BX SFP transceiver
|Console||1 x RJ45-to-RS232 serial port (9600, 8, N, 1)|
|Address Table||16K MAC address table with auto learning function|
|Shared Data Buffer||2MB|
|Flow Control||Back pressure for half-duplex
IEEE 802.3x pause frame for full-duplex
|LED||System: PWR, SYS, FAN
MGMT: LNK, ACT
1/10G SFP+ Slot: LNK/ACT
|Dimensions (W x D x H)||440 x 240 x 44 mm, 1U height|
|Power Consumption||27 watts/93 BTU (maximum)|
|Power Requirements||AC 100~240V, 50/60Hz
DC -48 ~ -60V
|System Configuration||Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3|
|Management||■ Supports both IPv4 and IPv6 Protocols
■ Supports the user IP security inspection for IPv4/IPv6 SNMP
■ Supports MIB and TRAP
■ Supports IPv4/IPv6 FTP/TFTP
■ Supports IPv4/IPv6 NTP
■ Supports RMON 1, 2, 3, 9 four groups
■ Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and
■ Supports IPv4/IPv6 SSH
■ The right configuration for users to adopt RADIUS server’s shell
■ Supports CLI, console, Telnet
■ Supports SNMPv1, v2c and v3
■ Supports Security IP safety net management function: Avoiding unlawful
landing at non-restrictive area
■ Supports Syslog server for IPv4 and IPv6
■ Supports TACACS+
|Layer 3 Function|
|Routing Protocol||Static routing, RIP and OSPF|
|Layer 2 Function|
|Port Configuration||Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Bandwidth control on each port
Port loopback detect
|Port Status||Display each port’s speed duplex mode, link status, flow control status and
auto negotiation status
|VLAN||802.1Q tagged based VLAN, up to 256 VLAN groups
802.1ad Q-in-Q (VLAN stacking)
GVRP for VLAN management
Private VLAN Edge (PVE) supported
IP subnet VLAN
|Link Aggregation||IEEE 802.3ad LACP/static trunk
Supports 128 groups with 8 ports per trunk group
|QoS||8 priority queues on all switch ports
Supports strict priority and Weighted Round Robin (WRR) CoS policies
- IEEE 802.1p CoS/ToS
- IPv4/IPv6 DSCP
- Port-based WRR
|Multicast||IGMP v1/v2/v3 snooping
Querier mode support
MLD v1/v2 snooping
Querier mode support
Multicast VLAN Register (MVR)
|Access Control List||Supports Standard and Expanded ACL
IP-based ACL/MAC-based ACL
Up to 512 entries
|Bandwidth Control||At least 64Kbps stream|
|Security||Supports MAC + port binding
IPv4/IPv6 + MAC + port binding
IPv4/IPv6 + port binding
Supports MAC filter
ARP scanning prevention
|Authentication||IEEE 802.1x port-based network access control
AAA authentication: TACACS+ and IPv4/IPv6 over RADIUS
|SNMP MIBs||RFC 1213 MIB-II
RFC 1215 Internet Engineering Task Force
RFC 1271 RMON
RFC 1354 IP-Forwarding MIB
RFC 1493 Bridge MIB
RFC 1643 Ether-like MIB
RFC 1907 SNMPv2
RFC 2011 IP/ICMP MIB
RFC 2012 TCP MIB
RFC 2013 UDP MIB
RFC 2096 IP forward MIB
RFC 2233 IF MIB
RFC 2452 TCP6 MIB
RFC 2454 UDP6 MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMP6 MIB
RFC 2573 SNMPv3 notification
RFC 2574 SNMPv3 VACM
RFC 2674 Bridge MIB Extensions
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3z Gigabit 1000BASE-SX/LX
IEEE 802.3ae 10Gb/s Ethernet
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1X port authentication network control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
FRC 3810 MLD v2
RFC 2328 OSPF v2
RFC 1058 RIP v1
RFC 2453 RIP v2
|Operating||Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 90% (non-condensing)
|Storage||Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 90% (non-condensing)
Device Downloads (Manuals, Quickstart Guides, Datasheets)
Versa Technology Device Warranty Information
Versa Technology honors its products that Versa and it's partners engineer and manufacture. Our products sold are of the highest standards available. All products come with a TWO year limited warranty on all products sold by directly by Versa Technology, unless specifically stated otherwise on our product documentation. This warranty period of two years applies from the ship date to all our products which are purchased legally and owned by the original customer. If you have purchased the product from a reseller you must contact the reseller directly. Should repairs fail to recover the product Versa Technology will replace the product with a similar product or a suitable replacement. Other information is as follows.
Versa Technology is not responsible for any other cost incurred.
All replacement units inherit the existing warranty.
Expedited return can be fulfilled for a predetermined fee.
An extended warranty may be purchased for eligible equipment.
If a product needs to be returned for RMA you can fill out the form HERE (RMA Page)
*Versa Technology assumes no responsibility for the risk of damage to any external devices (Devices that are not ours). It is the duty of the customer to check and make sure everything is compatible.
The Limited Warranty applies only to products sold directly by Versa Technology that can be identified as a Versa Technology product (by name, logo, purchase documentation). The Limited Warranty does not apply to (a) damage caused by accident, abuse, misuse, misapplication; (b) damage caused by unauthorized service performed by anyone who is not an authorized Versa Technology service specialist (c) a product or a part that has been modified without the written permission of Versa Technology; or (d) if any Versa Technology serial number has been removed or tampered.
Versa Technology warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
- AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period, Versa Technology shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced become the property of Versa Technology. Replacement products may be new or reconditioned. Versa Technology does not issue refunds or credit. Please contact the point-of-purchase for their return policies.
Versa Technology shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Versa Technology pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting Versa Technology within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all Versa Technology products. Products that are sent to Versa Technology for RMA service must have the RMA number marked on the outside of return packages and sent to Versa Technology prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE Versa Technology PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT Versa Technology’s OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Versa Technology NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF Versa Technology’s PRODUCTS.
Versa Technology SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW Versa Technology ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT Versa Technology’s OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of California.
Some Versa Technology products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, Versa Technology SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF Versa Technology CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. No Versa Technology reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty. Versa Technology IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH Versa Technology PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.
Shipping costs of products being returned are the responsibility of the customer. Cost of shipping products back to the customer will be paid by Versa Technology (Free ground shipping for USA - domestic customers only. International customers are responsible for shipping costs.) This warranty only applies to the customer whom purchased the product directly from Versa Technology.
Out of Warranty Service:
For products which are out of warranty, please call or fax in for a RMA number. Once the products for repair are received a quote will be generated for their repair. Customer approval must be obtained before work is begun in repairing or replacing the products. Once the products are repaired, payments must be made or sent for their repair costs before they are shipped back to customers. Shipping costs both to and from the customer are billed to the Customer for products which are out of warranty.