WDAP-W7200AC 1200Mbps 802.11ac Dual Band Wall-mount Wireless Access Point
This device has reached End-of-Life.
- Reviews (0)
Ultra-high-speed, Next-generation Wireless AP for Enterprises
PLANET WDAP-W7200AC, an enterprise PoE access point, features the latest 802.11ac wireless technology, advanced management functions and superior encryption standards yet cost-effective. Meeting today’s demand for advanced performance and security, the WDAP-W7200AC includes multiple SSIDs, WPA / WPA2, RADIUS MAC authentication and so forth. With the female reverse polarity SMA connectors, the WDAP-W7200AC can suitably and correctly be connected to external antennas and boosters in such wireless environments as warehouses, campuses and enterprises.
Extraordinary 11ac Wireless Technology
The WDAP-W7200AC supports IEEE 802.11a/b/g/n/ac dual band standards with 2T2R MIMO technology; therefore, it provides the wireless speed up to 300+866Mbps (2.4GHz+5GHz), which is 16x faster than the 11a access point at 5GHz frequency and 5.5x faster than the 11g access point at 2.4GHz frequency. Moreover, the WDAP-W7200AC is equipped with a Gigabit Ethernet port. Compared with the general wireless APs, the WDAP-W7200AC offers faster transmission speed for the network applications and less interference to enhance data throughput. The incredible wireless speed makes it ideal for handling multiple HD movie streams, high-resolution on-line games, stereo music, VoIPs and data streams at the same time stably and smoothly.
External High Gain Antenna and 11ac Technology
Bring Excellent Performance The WDAP-W7200AC is equipped with 5dBi detachable high gain antennas which provide a strong signal and excellent coverage even in the wide-ranging or bad environment. With the RP-SMA connectors, the external antenna such as omnidirectional or unidirectional or higher gain antenna enables to establish various highly-reliable applications. Its adjustable transmit power enables the administrator to flexibly reduce or increase the output power for various environments, thus reducing interference to achieve maximum performance. To experience extremely high-speed performance, the WDAP-W7200AC adopts IEEE 802.11ac technology to extend the 802.11n 40MHz channel binding to 80MHz and the implementation of 256-QAM modulation where higher transmitting/receiving rates go up to 867Mbps in 5GHz less interference frequency band. In addition, the WDAP-W7200AC is equipped with Gigabit LAN port to eliminate the restriction of 100Mbps Fast Ethernet wired connection to let users fully enjoy the high speed provided via wireless. The IEEE 802.11ac also optimizes MU-MIMO (Multi-User MIMO) mechanism to serve multiple devices simultaneously.
Wall Mount Designed for Highly-efficient Wireless Coverage
As it is a highly-reliable industrial wall-mount design, the WDAP-W7200AC can be firmly installed on the wall conveniently. The compact, rugged IP30 metal wall-mounted housing fits easily in any space-limited location and also makes it strong enough to withstand any harsh, industrial environment. It adopts “Front Access” design, making the installing, cable wiring, LED monitoring and maintenance very easy for technicians to manage. The WDAP-W7200AC provides a fixed and magnetic wall mounting installation methods making its deployment more flexible and highly efficient.
Comprehensive Wireless Security
In aspect of security, besides 64/128-bit WEP encryption, the WDAP-W7200AC is integrated with WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x RADIUS authorization to secure and protect your wireless LAN. It provides the wireless MAC filtering and SSID broadcast control to consolidate the wireless network security and prevent unauthorized wireless connection. Being an access point, the WDAP-W7200AC supports multiple SSIDs (10 sets of SSIDs). Moreover, its Wi-Fi Multimedia (WMM) mechanism provides enhanced QoS over wireless connection for better performance in multimedia transmission like on-line gaming and video streaming, which are classified as a top priority.
Flexible Enough to Achieve Various Applications
The WDAP-W7200AC supports AP, WDS Bridge, and Repeater modes, through which it provides more flexibility for users when wireless network is established. Compared with general wireless access point, the WDAP-W7200AC offers more powerful and flexible capability for wireless clients.
Flexible Deployment with PoE Feature
Compliant with the IEEE 802.3atPower over Ethernet Plus standard, the WDAP-W7200AC can be powered and networked over a single UTP cable. It thus reduces the needs of extra cables and electrical outlets on the wall, ceiling or any other place where they may not be found or may be difficult to reach. Thus, the wireless network deployment becomes more flexible.
Deployment Simplified through Centralized Management
The WDAP-W7200AC supports AP controller which can be switched to “managed AP” mode and thus can be centrally managed by PLANET WAPC-1232HP smart AP controller. It will certainly benefit the system integrators when the scale of the wireless network gets bigger. Furthermore, with user-friendly Web UI and Planet Smart Discovery supported, the WDAP-W7200AC is convenient to be managed and configured remotely in a small business wireless network.
1 x 10/100/1000BASE-T RJ45 port
Auto-negotiation and auto MDI/MDI-X
2 x 2.4GHz 5dBi SMA antenna
2 x 5GHz 5dBi SMA antenna
|Reset Button||Press over 5 seconds to reset the device to factory default|
Allow LED to turn off via software control
|Dimensions (L x W x H)||148 x 41 x 140 mm|
|Power Requirements||802.3at PoE, 48-56V DC input|
|Wireless Interface Specifications|
|Standard||IEEE 802.11ac (draft 2.0) 5GHz|
IEEE 802.11a/n 5GHz
IEEE 802.11b/g/n 2.4GHz
|Antenna Structure||802.11ac: 2T2R MU-MIMO|
802.11n: 2T2R MIMO
|Data Modulation||802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM)|
802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM)
802.11b: DSSS (DBPSK / DQPSK / CCK)
|Band Mode||2.4G / 5G concurrent mode|
America -- FCC: 2.412~2.462GHz
Europe -- ETSI: 2.412~2.484GHz5GHz:
America -- FCC: 5.180~5.240GHz, 5.725~5.850GHz
Europe -- ETSI: 5.180~5.240GHz
America -- FCC: 1~11
Europe -- ETSI: 1~135GHz:
America -- FCC:
36, 40, 44, 48, 149, 153, 157, 161, 165
Europe -- ETSI:
36, 40, 44, 48
5GHz channel list will vary in different countries according to their regulations.
|Channel Width||802.11ac: 20/40/80MHz|
|Transmission Distance||802.11ac (draft): up to 30m|
802.11n: up to 70m
802.11g: up to 30mThe estimated transmission distance is based on the theory. The actual distance will vary in different environments.
|Max. RF Power||5GHz:|
802.11ac (VHT20): 22dBm
802.11ac (VHT40): 22dBm
802.11ac (VHT80): 22dBm
802.11n (HT20): 22dBm
802.11n (HT40): 22dBm
802.11n: 17 ±2.5dBm
802.11b/g: 20 ±2.5dBm
802.11ac (VHT20): -91dBm @ Nss1-MCS0, -64dBm @ Nss2-MCS8
802.11ac (VHT40): -89dBm @ Nss1-MCS0, -59dBm @ Nss2-MCS9
802.11ac (VHT80): -86dBm @ Nss1-MCS0, -56dBm @ Nss2-MCS9
802.11n (HT20): -92dBm @ MCS0, -71dBm @ MCS7
802.11n (HT40): -89dBm @ MCS0, -66dBm @ MCS15
802.11a: -93 @ 6Mbps, -75dBm @ 54Mbps2.4GHz:
802.11n 20MHz (MCS7): -69dBm @10% PER
802.11n 40MHz (MCS15): -66dBm @10% PER
802.11g (54Mbps): -74dBm @10% PER
802.11b (11Mbps): -88dBm @10% PER
|Wireless Mode||■ Universal Repeater (AP+Client)|
■ Repeater (WDS+AP)
■ AP (Access Point)
■ WDS PTP (Point to Point)
■ WDS PTMP (Point to Multipoint)
|Encryption Security||■ WEP (64/128-bit) encryption security|
■ WPA / WPA2 (TKIP/AES)
■ WPA-PSK / WPA2-PSK (TKIP/AES)
■ 802.1x RADIUS Authentication
|Wireless Security||■ Wireless MAC address filtering|
■ Supports WPS (Wi-Fi Protected Setup)
■ Enable/ Disable SSID Broadcast
|Wireless Advanced||■ WMM (Wi-Fi Multimedia), max. associated station number|
■ Multiple SSIDs: up to 5 at 2.4GHz and 5 at 5GHz
■ Wireless Isolation: Enable it to isolate each connected wireless
client from communicating with each other
■ IAPP (Inter Access Point Protocol): 802.11f wireless roaming
■ Provides wireless statistics
|Max. Clients||■ Wired: 253|
■ 2.4GHz Wireless: 32
■ 5GHz Wireless: 32
|LAN||■ Built-in DHCP server supporting static IP address distribution|
■ Supports UPnP
■ Supports 802.1d Spanning Tree
|System Management||■ Web-based (HTTP) management interface|
■ SNTP synchronization
■ Easy firmware upgrade
■ Supports scheduled reboot
■ Supports Smart Discovery Utility
■ Supports WAPC-1232HP AP controller
|IEEE Standards||IEEE 802.11ac (draft 2.0, 2T2R, up to 867Mbps)|
IEEE 802.11n (2T2R, up to 300Mbps)
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x flow control
|Other Protocols and Standards||CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP|
|Environment & Certification|
|Temperature||Operating: -10 ~ 60 degrees C|
Storage: -20 ~ 60 degrees C
|Humidity||Operating: 10 ~ 90% (non-condensing)|
Storage: 5 ~ 90% (non-condensing)
Device Downloads (Manuals, Quickstart Guides, Datasheets)
Planet Technology USA Device Warranty Information
Planet Technology USA honors its products that Planet and it's partners engineer and manufacture. Our products sold are of the highest standards available. All products come with a TWO year limited warranty on all products sold by directly by Planet Technology USA, unless specifically stated otherwise on our product documentation. This warranty period of two years applies from the ship date to all our products which are purchased legally and owned by the original customer. If you have purchased the product from a reseller you must contact the reseller directly. Should repairs fail to recover the product Planet Technology USA will replace the product with a similar product or a suitable replacement. Other information is as follows.
Planet Technology USA is not responsible for any other cost incurred.
All replacement units inherit the existing warranty.
Expedited return can be fulfilled for a predetermined fee.
An extended warranty may be purchased for eligible equipment.
If a product needs to be returned for RMA you can fill out the form HERE (RMA Page)
*Planet Technology USA assumes no responsibility for the risk of damage to any external devices (Devices that are not ours). It is the duty of the customer to check and make sure everything is compatible.
The Limited Warranty applies only to products sold directly by Planet Technology USA that can be identified as a Planet Technology USA product (by name, logo, purchase documentation). The Limited Warranty does not apply to (a) damage caused by accident, abuse, misuse, misapplication; (b) damage caused by unauthorized service performed by anyone who is not an authorized Planet Technology USA service specialist (c) a product or a part that has been modified without the written permission of Planet Technology USA; or (d) if any Planet Technology USA serial number has been removed or tampered.
Planet Technology USA warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
- AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period, Planet Technology USA shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced become the property of Planet Technology USA. Replacement products may be new or reconditioned. Planet Technology USA does not issue refunds or credit. Please contact the point-of-purchase for their return policies.
Planet Technology USA shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Planet Technology USA pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting Planet Technology USA within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all Planet Technology USA products. Products that are sent to Planet Technology USA for RMA service must have the RMA number marked on the outside of return packages and sent to Planet Technology USA prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE PLANET TECHNOLOGY USA PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT PLANET TECHNOLOGY USA'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PLANET TECHNOLOGY USA NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF PLANET TECHNOLOGY USA'S PRODUCTS.
PLANET TECHNOLOGY USA SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW PLANET TECHNOLOGY USA ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT PLANET TECHNOLOGY USA'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of California.
Some Planet Technology USA products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, PLANET TECHNOLOGY USA SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF PLANET TECHNOLOGY USA CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. NO PLANET TECHNOLOGY USA RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. PLANET TECHNOLOGY USA IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH PLANET TECHNOLOGY USA PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.
Shipping costs of products being returned are the responsibility of the customer. Cost of shipping products back to the customer will be paid by Planet Technology USA (Free ground shipping for USA - domestic customers only. International customers are responsible for shipping costs.) This warranty only applies to the customer whom purchased the product directly from Planet Technology USA.
Out of Warranty Service:
For products which are out of warranty, please call or fax in for a RMA number. Once the products for repair are received a quote will be generated for their repair. Customer approval must be obtained before work is begun in repairing or replacing the products. Once the products are repaired, payments must be made or sent for their repair costs before they are shipped back to customers. Shipping costs both to and from the customer are billed to the Customer for products which are out of warranty.