WGSW-48040HP L2+ 48-Port 10/100/1000T 802.3at PoE + 4-Port Shared 100/1000X SFP Managed Switch (600W)

WGSW-48040HP L2+ 48-Port 10/100/1000T 802.3at PoE + 4-Port Shared 100/1000X SFP Managed Switch (600W)

$1,438.00

The WGSW-48040HP is a 48-port managed switch with PoE capabilities.

  • Ports:   48 10/100/1000TX Shared  4 100/1000X TP/SFP
  • Type:   Managed
  • PoE Ports:   48
  • Standard:   802.3at/af
  • Total PoE Budget:   600 Watts at 25°C
  • Operating Temp.:   0-50°C
  • Power Consumption:   722 Watts /2462 BTU
  • Throughput:   71.4 Mpps@64 Bytes
SKU: WGSW-48040HP Categories: , Tags: , , ,
  • Description
  • Specs
  • Downloads
  • Reviews (0)
  • Warranty

Product Description

PoE Solution and Layer 3 Static Routing

The WGSW-48040HP is a quality unit offering high density performance with IPv4 and IPv6 Layer 3 static routing. The WGSW-48040HP features 48 IEEE 802.3at PoE+ ports and a PoE budget up to 600 watts to allow for medium to large scale VoIP or IP Surveillance networks at a budget friendly price.

Budget Friendly PoE Switch

The WGSW-48040HP operates efficiently with the POE-E201 extender from Planet Technology to reach up to 200M, 300M or higher. In addition, the 96Gbps high performance switch architecture and 600-watt PoE power budget allows the unit to power 36 or more PoE IP cameras. Through the cameras, recorded video files can be managed by either 8/16/32-channel NVR systems or surveillance software.

IPv6 Networking Solution

This unit is ideal for IPv6 networking and supports both the IPv4 and IPv6 with a variety of management functions. The WGSW-48040HP is a quality selection for IP surveillance and wireless service providers to connect efficiently with the IPv6 network.

Central Power Management

The WGSW-48040HP offers high-performance Gigabit IEEE 802.3af PoE (up to 15.4 watts) and up to 30 watts of  IEEE 802.3at PoE+ on all ports. The unit meets the requirement of PoE VoIP phones and a variety of PoE IP camera including IR, PTZ, speed dome cameras or  box type IP cameras that feature a built-in fan and heater.

The WGSW-48040HP’s PoE capabilities cuts down costs associated with deployment  for network devices. Since power and data switching are blended into one unit, they are delivered over a single cable and managed mainly.  This cuts down the cost for additional AC wiring and lowers installation time.

Built-in Unique PoE Functions for Surveillance Management

As a Managed PoE Switch for surveillance network, the WGSW-48040HP features intelligent PoE Management functions:

  • PD Alive Check
  • Scheduled Power Recycling
  • SMTP/SNMP Trap Event Alert
  • PoE Schedule

Powered Device Alive Check Feature

The WGSW-48040HP can be efficiently configured to check the status of powered devices in real time utilizing the ping action. If a device has stopped operation, the WGSW-48040HP works to resume the PoE port power in order to bring the device back. This feature ensures network stability and lowers administrative responsibilities.

Scheduled Power Recycling

The WGSW-48040HP ensures PoE IP cameras connected to reboot at a designated time each week. This cuts down the chance of IP camera crashes.

SMTP/SNMP Trap Event Alert

The WGSW-48040HP even further offers a dependable  event alert function to allow for the diagnosis of abnormal devices to determine if there is a loss in network connection or PoE power.

PoE Schedule for Energy Conservation

The WGSW-48040HP can efficiently construct any PoE network.The WGSW-48040HP allows for the conservation of energy and offers high watt power. The “PoE schedule” feature allows users to enable or disable the PoE power feeding for each PoE port during  time intervals.

Dependable Layer 2 Features

The WGSW-48040HP can be efficiently programmed for the following advanced switch management features: dynamic Port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD Snooping. The unit also offers 802.1Q Tagged VLAN, with VLAN groups allowed up to 255. With the aggregation of supporting ports, the unit permits the operation of a high-speed trunk with the combination of multiple ports, along with fail-over.

IPv4 and IPv6 VLAN Routing for Better Management

The WGSW-48040HP allows for ultra high transmission performance and excellent layer 2 technologies. In addition, the unit allows for IPv4/IPv6 VLAN routing which allows users to cross over various VLANs and different IP addresses in order to have secure flexible management.

Superior Security Features

The WGSW-48040HP provides comprehensive Layer 2 to Layer 4 Access Control List (ACL) in order to enforce stricter security. The unit can be utilized to restrict network access by refusing packets based on the source and destination IP address, TCP/UDP ports or defined typical network applications. The unit also provides 802.1x Port-based and MAC-based user and device authentication. In addition, the private VLAN function, communication between edge ports can be prevented to ensure user privacy. In addition, the WGSW-48040HP provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address.

Stable Secure Management Functions

The WGSW-48040HP Managed Switch features console, WEB and SNMP management interfaces. The unit includes a Web-based management interface and operates as a management and configuration facility that is platform independent. The WGSW-48040HP supports standard Simple Network Management Protocol (SNMP) and can be efficiently managed through management software that supports SNMP protocol. The unit can be accessed through Telnet and the console port for text-based management. In addition, the WGSW-48040HP provides secure remote management with the support of SSH, SSL and SNMPv3 connection which encrypts the packet content at each session.

Versatile Uplink Solution

The WGSW-48040HP provides 4 extra Gigabit TP/SFP combo interfaces that support 10/100/1000Base-T RJ-45 copper that allows for the connection of surveillance network devices including NVR, Video Streaming Server or NAS to manage surveillance management. Via the SFP slots, connection can be made with the 100Base-FX / 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers with multi-mode fiber and above 10/20/30/40/50/70/120 kilometers with single-mode fiber or WDM fiber. They are well suited for applications within the enterprise data centers and distributions.

 

Optional SFP Modules:

– 1,000Mbps Gigabit Ethernet SFP Fiber Transceivers:

Click Here for 1000FX SFP Options

-100Mbps Fast Ethernet SFP Fiber Transceivers:

Click Here for 100FX SFP Options 

Hardware Specifications
Copper Ports 48 10/100/1000Base-T RJ-45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 4 100/1000Base-X SFP interfaces, shared with Port-45 to Port-48
Compatible with 100Base-FX SFP transceiver
Console 1 x RJ-45 to RS-232 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 96Gbps / non-blocking
Throughput 71.4 Mpps@64Bytes
Address Table 16K entries, automatic source address learning and ageing
Share Data Buffer 16M bits
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10056bytes
Reset Button < 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H) 440 x 440 x 44.2 mm, 1U height
LED System:
Power (Green)
SYS (System, Green)
Alert:
Fan Alarm 1 (Red)
Fan Alarm 2 (Red)
PoE Ethernet Interfaces (Port 1 to Port 48):
LNK/ACT (10/100/1000Mbps, Green)
PoE-in-Use (Orange)
100/1000Mbps SFP Combo Interfaces (Port 45 to Port 48):
LNK/ACT (100/1000X, Green)
Power Requirements 100-240V AC, 50/60Hz, 12A
Power Consumption 722 watts / 2462 BTU
ESD Protection 2KV DC
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at PoE / PSE
PoE Power Supply Type End-Span
PoE Power Output Per Port 52V DC, 590mA
Max. 30.8 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 600 watts (max.)@ 25 degrees C
PoE Ability PD @ 11 watts: 48 units
PD @ 15.4 watts: 38 units
PD @ 30.8 watts: 19 units
Layer 2 Functions
Port Configuration Port disable / enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable / enable
Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
Port Mirroring TX / RX / Both
Many-to-1 monitor
VLAN 802.1Q Tagged-based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
IP Subnet-based VLAN
MVR (Multicast VLAN Registration)
GVRP
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation IEEE 802.3ad LACP / Static Trunk
24 groups of 8-Port trunk support
Spanning Tree Protocol STP / RSTP / MSTP
QoS Traffic classification based, Strict priority and WRR
8-level priority for switching
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP Packet
IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
IGMP Querier mode support
MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast groups
MLD Querier mode support
Access Control List IP-based ACL / MAC-based ACL
Up to 256 entries
Bandwidth Control Per port bandwidth control
Ingress: 100Kbps~1000Mbps
Egress: 100Kbps~1000Mbps
Layer 3 Functions
IP Interfaces Max. 128 VLAN interfaces
Routing Table Max. 32 routing entries
Routing Protocols IPv4 Static Routing
IPv6 Static Routing
Management Functions
Basic Management Interfaces Console, Telnet, Web Browser, SNMP v1, v2c
Secure Management Interfaces SSH, SSL, SNMP v3
SNMP MIBs RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
LLDP
PoE-Ethernet MIB
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet PLUS
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2

Device Downloads (Manuals, Quickstart Guides, Datasheets)

WGSW-48040HP Datasheet (pdf)

WGSW-48040HP User Manual (pdf)

Reviews

There are no reviews yet.


Be the first to review “WGSW-48040HP L2+ 48-Port 10/100/1000T 802.3at PoE + 4-Port Shared 100/1000X SFP Managed Switch (600W)”

Versa Technology Device Warranty Information

 

Versa Technology honors its products that Versa and it's partners engineer and manufacture. Our products sold are of the highest standards available. All products come with a TWO year limited warranty on all products sold by directly by Versa Technology, unless specifically stated otherwise on our product documentation. This warranty period of two years applies from the ship date to all our products which are purchased legally and owned by the original customer. If you have purchased the product from a reseller you must contact the reseller directly. Should repairs fail to recover the product Versa Technology will replace the product with a similar product or a suitable replacement. Other information is as follows.

 

  1. Versa Technology is not responsible for any other cost incurred.

  2. All replacement units inherit the existing warranty.

  3. Expedited return can be fulfilled for a predetermined fee.

  4. An extended warranty may be purchased for eligible equipment.

  5. If a product needs to be returned for RMA you can fill out the form HERE (RMA Page)

 

*Versa Technology assumes no responsibility for the risk of damage to any external devices (Devices that are not ours). It is the duty of the customer to check and make sure everything is compatible.

 

The Limited Warranty applies only to products sold directly by Versa Technology that can be identified as a Versa Technology product (by name, logo, purchase documentation). The Limited Warranty does not apply to (a) damage caused by accident, abuse, misuse, misapplication; (b) damage caused by unauthorized service performed by anyone who is not an authorized Versa Technology service specialist (c) a product or a part that has been modified without the written permission of Versa Technology; or (d) if any Versa Technology serial number has been removed or tampered.

 

Versa Technology warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.

 

  • AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.

 

If a product does not operate as warranted during the applicable warranty period, Versa Technology shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced become the property of Versa Technology. Replacement products may be new or reconditioned. Versa Technology does not issue refunds or credit. Please contact the point-of-purchase for their return policies.

 

Versa Technology shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Versa Technology pursuant to any warranty.

 

There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.

 

Warranty service may be obtained by contacting Versa Technology within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all Versa Technology products. Products that are sent to Versa Technology for RMA service must have the RMA number marked on the outside of return packages and sent to Versa Technology prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.

 

WARRANTIES EXCLUSIVE: IF THE Versa Technology PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT Versa Technology’s OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Versa Technology NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF Versa Technology’s PRODUCTS.

 

Versa Technology SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.

 

LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW Versa Technology ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT Versa Technology’s OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

 

Governing Law: This Limited Warranty shall be governed by the laws of the state of California.

 

Some Versa Technology products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").

 

THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, Versa Technology SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF Versa Technology CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. No Versa Technology reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty. Versa Technology IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH Versa Technology PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.

 

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.

 

Shipping costs of products being returned are the responsibility of the customer. Cost of shipping products back to the customer will be paid by Versa Technology (Free ground shipping for USA - domestic customers only. International customers are responsible for shipping costs.) This warranty only applies to the customer whom purchased the product directly from Versa Technology.

 

Out of Warranty Service:

 

For products which are out of warranty, please call or fax in for a RMA number. Once the products for repair are received a quote will be generated for their repair. Customer approval must be obtained before work is begun in repairing or replacing the products. Once the products are repaired, payments must be made or sent for their repair costs before they are shipped back to customers. Shipping costs both to and from the customer are billed to the Customer for products which are out of warranty.

Happy Holidays! Our office will be closed Dec. 23-26th & Jan. 2nd