WNAP-7320 5GHz 300Mbps 802.11a/n Outdoor Wireless Access Point (Built-in 14dBi Antenna)
This device has reached End-of-Life.
- Reviews (0)
High Power Outdoor Wireless Coverage
PLANET has come out with the latest high power outdoor wireless LAN solution – the WNAP-7320 300Mbps Outdoor Wireless AP. It provides higher transmit power, better performance, wider coverage and more stable connections than standard outdoor wireless APs. The WNAP-7320 is compliant with IEEE 802.11n standard and 2T2R MIMO technology which is six times faster than the normal 802.11a wireless device. The IEEE 802.11n standard can deliver data rates of up to 300Mbps. Via the embedded 14dBi dual-polarization (vertical and horizontal) directional antenna, it provides good diversity coverage and better noise immunity. The WNAP-7320 can extend a wider coverage in outdoor long range applications due to its high sensitivity and high output power (up to 500mW).
Multiple Operating and Wireless Modes
The WNAP-7320 supports multiple wireless communication connectivity (AP / Client CPE / WDS PtP / WDS PtMP / Repeater) allowing for various application requirements and thus gives users more comprehensive using experience. It helps users to easily build a wireless network and extend the wireless range of existing wireless networks. The WNAP-7320 also supports WISP mode, so CPE users can easily connect to Internet via WISP provider or connect to a wired network.
Advanced Security and Management
The WNAP-7320 integrates WPA / WPA2, WPA-PSK and WPA2-PSK to secure and protect your wireless LAN as well as 64/128-bit WEP encryption, t. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless connection. In addition, with the Dual-SSID feature you can set up two different wireless networks. The WNAP-7320 can therefore serve as a virtual access point for segmented networks tailored to any office or industrial need.
Highly Reliable Outdoor Device
The WNAP-7320 is perfectly suitable to be installed in outdoor environments and exposed locations. Rated to operate at the temperature from -30 to 75 degrees C and adopting IP55 and outdoor UV stabilized enclosure. The WNAP-7320 can perform normally under rigorous weather conditions including heavy rain and wind. With the proprietary Power over Ethernet (PoE) design, the WNAP-7320 can be easily installed in the areas where power outlets are not available. It is the best way to use the WNAP-7320 to build outdoor wireless access applications between buildings on campuses, business communities, rural areas, etc.
Easy Installation and Management
With user-friendly Web UI and step by step Setup Wizard, the WNAP-7320 is easier to install, even for users who never experience in setting up a wireless network. Furthermore, with SNMP-based management interface, the WNAP-7320 is convenient to be managed and configured remotely.
|Standard Support||IEEE 802.11a/n Wireless LAN
IEEE 802.11i Wireless Security
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3x Flow Control
|Memory||32 Mbytes DDR SDRAM
8 Mbytes Flash
|Interface||Wireless IEEE 802.11a/n, 2T2R
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
|Antenna||Built-in 14dBi Dual-Polarization Antenna
- Horizontal: 45 degree
- Vertical: 60 degree
|Wireless RF Specifications|
|Wireless Technology||IEEE 802.11a
|Data Rate||IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
IEEE 802.11n (20MHz): up to 150Mbps
IEEE 802.11n (40MHz): up to 300Mbps
|Media Access Control||CSMA / CA|
|Modulation||Transmission / Emission Type: OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
|Frequency Band||5.180GHz ~ 5.825GHz|
*The above 24 channels are defined in theory. The actual application will vary depending on the regulation in different regions and countries.
|RF Output Power||IEEE 802.11a: 27 ± 1dBm
IEEE 802.11n: 24 ± 1dBm
|Receiver Sensitivity||IEEE 802.11a: -92 ~ -73dBm @ 6Mbps ~ 54Mbps
IEEE 802.11n: -94 ~ -73dBm @ MCS0 ~ MCS15
|Output Power Control||3~27dBm|
|LAN||Built-in DHCP server supporting static IP address distributing
Supports 802.1d STP (Spanning Tree)
|WAN|| ■ Static IP
■ Dynamic IP
|Operating Mode|| ■ Bridge
|Firewall||NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Virtual Server and DMZ
Built-in firewall with Port / IP address / MAC / URL filtering
|Wireless Mode|| ■ AP
■ WDS PTP
■ WDS PTMP
■ WDS Repeater (AP+WDS)
|Channel Width||20MHz / 40MHz|
|Wireless Isolation||Enables isolation of each connected wireless client from communicating with each other mutually.|
|Encryption Type||64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X|
|Wireless Security||Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (Wi-Fi Protected Setup )
Enable / Disable SSID Broadcast
|Multiple SSID||Up to 2|
|Max. Wireless Client||40|
|Max. WDS AP||8|
|Max. Wired Client||60|
|WMM||Supports Wi-Fi Multimedia|
|QoS||Supports Quality of Service for bandwidth control|
|NTP||Network Time Management|
|Management||Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP|
|Diagnostic Tool||System Log, Ping Watchdog|
|Mechanical & Power|
|Material||Outdoor UV Stabilized Enclosure|
|Dimensions (W x D x H)||275 x 93 x 45 mm|
|Weight||336 ± 5g|
|Installation||Pole mounting or Wall mounting|
■ 24V DC, 0.5A/ Passive PoE
■ Pin 4,5 VDC+
■ Pin 7,8 VDC-
|Environment & Certification|
|Operating Temperature||-30~75 degrees C|
|Operating Humidity||10~95% non-condensing|
|Regulatory||CE / RoHS|
|Standard Accessories|| ■ 24V DC Passive PoE Injector & Power Cord x 1
■ Mounting Tie x 2
■ Quick Installation Guide x 1
■ CD (User’s Manual, Quick Installation Guide) x 1
Device Downloads (Manuals, Quickstart Guides, Datasheets)
Planet Technology USA Device Warranty Information
Planet Technology USA honors its products that Planet and it's partners engineer and manufacture. Our products sold are of the highest standards available. All products come with a TWO year limited warranty on all products sold by directly by Planet Technology USA, unless specifically stated otherwise on our product documentation. This warranty period of two years applies from the ship date to all our products which are purchased legally and owned by the original customer. If you have purchased the product from a reseller you must contact the reseller directly. Should repairs fail to recover the product Planet Technology USA will replace the product with a similar product or a suitable replacement. Other information is as follows.
Planet Technology USA is not responsible for any other cost incurred.
All replacement units inherit the existing warranty.
Expedited return can be fulfilled for a predetermined fee.
An extended warranty may be purchased for eligible equipment.
If a product needs to be returned for RMA you can fill out the form HERE (RMA Page)
*Planet Technology USA assumes no responsibility for the risk of damage to any external devices (Devices that are not ours). It is the duty of the customer to check and make sure everything is compatible.
The Limited Warranty applies only to products sold directly by Planet Technology USA that can be identified as a Planet Technology USA product (by name, logo, purchase documentation). The Limited Warranty does not apply to (a) damage caused by accident, abuse, misuse, misapplication; (b) damage caused by unauthorized service performed by anyone who is not an authorized Planet Technology USA service specialist (c) a product or a part that has been modified without the written permission of Planet Technology USA; or (d) if any Planet Technology USA serial number has been removed or tampered.
Planet Technology USA warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
- AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period, Planet Technology USA shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced become the property of Planet Technology USA. Replacement products may be new or reconditioned. Planet Technology USA does not issue refunds or credit. Please contact the point-of-purchase for their return policies.
Planet Technology USA shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Planet Technology USA pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting Planet Technology USA within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all Planet Technology USA products. Products that are sent to Planet Technology USA for RMA service must have the RMA number marked on the outside of return packages and sent to Planet Technology USA prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE PLANET TECHNOLOGY USA PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT PLANET TECHNOLOGY USA'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PLANET TECHNOLOGY USA NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF PLANET TECHNOLOGY USA'S PRODUCTS.
PLANET TECHNOLOGY USA SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW PLANET TECHNOLOGY USA ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT PLANET TECHNOLOGY USA'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of California.
Some Planet Technology USA products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, PLANET TECHNOLOGY USA SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF PLANET TECHNOLOGY USA CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. NO PLANET TECHNOLOGY USA RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. PLANET TECHNOLOGY USA IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH PLANET TECHNOLOGY USA PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.
Shipping costs of products being returned are the responsibility of the customer. Cost of shipping products back to the customer will be paid by Planet Technology USA (Free ground shipping for USA - domestic customers only. International customers are responsible for shipping costs.) This warranty only applies to the customer whom purchased the product directly from Planet Technology USA.
Out of Warranty Service:
For products which are out of warranty, please call or fax in for a RMA number. Once the products for repair are received a quote will be generated for their repair. Customer approval must be obtained before work is begun in repairing or replacing the products. Once the products are repaired, payments must be made or sent for their repair costs before they are shipped back to customers. Shipping costs both to and from the customer are billed to the Customer for products which are out of warranty.