GS-4210-24P4C IPv6/IPv4, 24-Port Managed 802.3at POE+ Gigabit Ethernet Switch + 4-Port Gigabit Combo TP/SFP (220W)
The GS-4210-24P4C is a 24-port Gigabit Ethernet Switch with PoE capabilities.
- Ports: 24 10/1000/1000TX + 4 100/1000X TP/SFP
- Type: Managed
- PoE Ports: 24
- Standards: 802.3at/af
- Total PoE Budget: 220W at 25°C, 190W at 50°C
- Operating Temp.: 0-50°C
- Power Consumption: 275 Watts/938.3 BTU
- Throughput: 41.67Mpps@64 Bytes
- Reviews (0)
Managed PoE+ Switch with Advanced L2/L4 Switching and Security
The GS-4210-24P4C offers IPv6/IPv4 dual stack management and boasts a built-in L2/L4 Gigabit switching engine with 24 10/100/1000BASE-T ports. Each interface supports up to 30-watts of 802.3at PoE+ power and offers 4 additional Gigabit TP/SFP combo ports.
With a total power budget of up to 220 watts, the GS-4210-24P4C provides a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.
Comprehensive PoE Power Management
The GS-4210-24P4C features special PoE management functions such as PD Alive Check, scheduled power recycling, PoE schedule and PoE Usage Monitoring. The GS-4210-24P4C can monitor the status of connected PDs (Powered Device) in real time via a ping command.
If a PD goes to sleep mode, the GS-4210-24P4C will resume the PoE port power and reactivate the PD. The GS-4210-24P4C allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week to prevent buffer overflow. The “PoE schedule” function helps administrators enable or disable PoE power for each PoE port during a pre-specified time interval.
Robust Layer 2 Features
The GS-4210-24P4C can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via link aggregation, the GS-4210-24P4C allows for the operation of a high-speed trunk that combines multiple ports. The unit supports failover as well. The Link Layer Discovery Protocol (LLDP) is a Layer 2 protocol that accumulates basic information about neighboring devices on the local broadcast domain.
Efficient Traffic Control
The GS-4210-24P4C’s powerful QoS features offers powerful traffic management to preserve data, voice, and video transmission quality. Functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking.
The GS-4210-24P4C offers a comprehensive IPv4 / IPv6 Layer 2 to Layer 4 Access Control List (ACL) to provide maximum security.The unit restricts network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With 802.1X port-based user and device authentication, the unit can be deployed with RADIUS to ensure the port level security and block illegal users.
With its protected port function, communication between edge ports can be prevented to guarantee user privacy. Its Port security function limits the number of network devices on a given port. The unit supports IPv6 and IPv4 protocols allowing the GS-4210-24P4C.
Advanced Network Security
The GS-4210-24P(L)4C also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attacking and effectively discards ARP packets with invalid MAC address. Network administrators can now construct highly-secure corporate networks in considerably less time and effort than before.
For efficient management, the GS-4210-24P(L)4C is equipped with console, web, telnet and SNMP management interfaces. With its built-in web-based management interface, the GS-4210-24P(L)4C offers an easy-to-use, platform-independent management and configuration facility.By supporting Simple Network Management Protocols (SNMP), the switch can be managed via any standard management software.
The switch can be accessed via telnet and the console port for text-based management. In addition, the GS-4210-24P4C offers secure remote management with its SSH, SSL and SNMPv3 connections which encrypt the packet content at each session.
The GS-4210-24P(L)4C provides 4 extra gigabit TP interfaces supporting 10/100/1000BASE-T RJ45 copper. With its dual-speed fiber SFP slots, the unit can also connect with 100BASE-FX / 1000BASE-SX/LX SFP(Small Form-factor Pluggable) fiber transceivers to uplink to the backbone switch at a long distance location. Distances can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). The GS-4210-24P4C supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrators, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Optional SFP Modules:
– 1,000Mbps Gigabit Ethernet SFP Fiber Transceivers:
-100Mbps Fast Ethernet SFP Fiber Transceivers:
|Copper Ports||28 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X port|
|SFP/mini-GBIC Slots||4 x 100/1000BASE-X SFP interface shared with port-25 to port-28|
Supports 100/1000Mbps dual mode and DDM
|PoE Injector Port||24 ports with 802.3at / af PoE injector function with port-1 to port-24|
|Console||1 x RS232-to-RJ45 serial port (115200, 8, N, 1)|
|Switch Fabric||56Gbps / non-blocking|
|Address Table||8K entries|
|Shared Data Buffer||4.1 megabits|
|Flow Control||IEEE 802.3x pause frame for full-duplex|
Back pressure for half-duplex
|Jumbo Frame||10K bytes|
|Reset Button||< 5 sec: System reboot|
> 5 sec: Factory default
|LED||PWR, SYS, LNK/ACT, PoE-in-Use, 1000, FAN 1 Alert, FAN 2 Alert, PoE PWR Alert|
|Power Requirements||100~240V AC, 50/60Hz, auto-sensing|
|Dimensions (W x D x H)||440 x 300 x 44.5 mm, 1U height|
|ESD Protection||Contact Discharge 4KV DC|
Air Discharge 8KV DC
|Power Consumption / Dissipation||GS-4210-24P4C: 275 watts (max.) / 938.3 BTU|
GS-4210-24PL4C: 544 watts (max.) / 1856.2 BTU
|Fan||GS-4210-24P4C: 2 x smart fan|
GS-4210-24PL4C: 3 x smart fan
|Power over Ethernet|
|PoE Standard||IEEE 802.3af / 802.3at PoE+ PSE|
|PoE Power Supply Type||End-span|
|PoE Power Output||Per port 52V DC, 30.8 watts (max.)|
|Power Pin Assignment||1/2(+), 3/6(-)|
|PoE Power Budget||GS-4210-24P4C:|
220 watts (max.) @ 25 degrees C
190 watts (max.) @ 50 degrees C
440 watts (max.) @ 25 degrees C
380 watts (max.) @ 50 degrees C
|PoE Ability PD @ 9 watts||GS-4210-24P4C: 24 units|
GS-4210-24PL4C: 24 units
|PoE Ability PD @ 15.4 watts||GS-4210-24P4C: 14 units|
GS-4210-24PL4C: 24 units
|PoE Ability PD @ 30 watts||GS-4210-24P4C: 7 units|
GS-4210-24PL4C: 14 units
|Layer 2 Functions|
|Port Mirroring||TX / RX / both|
|VLAN||802.1Q tagged-based VLAN|
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Private VLAN (Protected port)
|Link Aggregation||IEEE 802.3ad LACP and static trunk|
Supports 8 groups of 8-port trunk
|Spanning Tree Protocol||STP, IEEE 802.1D Spanning Tree Protocol|
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
|IGMP Snooping||IGMP (v2/v3) snooping|
Up to 256 multicast groups
|MLD Snooping||MLD (v1/v2) snooping, up to 256 multicast groups|
|Access Control List||IPv4/IPv6 IP-based ACL / MAC-based ACL|
|QoS||8 mapping ID to 8 level priority queues|
– Port number
– 802.1p priority
– 802.1Q VLAN tag
– DSCP field in IP packet
Traffic classification based, strict priority and WRR
|Security||IEEE 802.1X port-based authentication|
Built-in RADIUS client to co-operate with RADIUS server
RADIUS / TACACS+ user access authentication
IP-MAC port binding
Static MAC address
DHCP Snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
IP source guard
|Basic Management Interfaces||Web browser / Telnet / SNMP v1, v2c|
Firmware upgrade by HTTP / TFTP protocol through Ethernet network
Remote / Local Syslog
|Secure Management Interfaces||SSH, SSL, SNMP v3|
|SNMP MIBs||RFC 1213 MIB-II|
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIB
|Regulation Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3 10BASE-T|
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2
|Operating||Temperature: 0 ~ 50 degrees C|
Relative Humidity: 5 ~ 95% (non-condensing)
|Storage||Temperature: -20 ~ 70 degrees C|
Relative Humidity: 5 ~ 95% (non-condensing)
Device Downloads (Manuals, Quickstart Guides, Datasheets)
Planet Technology USA Device Warranty Information
Planet Technology USA honors its products that Planet and it's partners engineer and manufacture. Our products sold are of the highest standards available. All products come with a TWO year limited warranty on all products sold by directly by Planet Technology USA, unless specifically stated otherwise on our product documentation. This warranty period of two years applies from the ship date to all our products which are purchased legally and owned by the original customer. If you have purchased the product from a reseller you must contact the reseller directly. Should repairs fail to recover the product Planet Technology USA will replace the product with a similar product or a suitable replacement. Other information is as follows.
Planet Technology USA is not responsible for any other cost incurred.
All replacement units inherit the existing warranty.
Expedited return can be fulfilled for a predetermined fee.
An extended warranty may be purchased for eligible equipment.
If a product needs to be returned for RMA you can fill out the form HERE (RMA Page)
*Planet Technology USA assumes no responsibility for the risk of damage to any external devices (Devices that are not ours). It is the duty of the customer to check and make sure everything is compatible.
The Limited Warranty applies only to products sold directly by Planet Technology USA that can be identified as a Planet Technology USA product (by name, logo, purchase documentation). The Limited Warranty does not apply to (a) damage caused by accident, abuse, misuse, misapplication; (b) damage caused by unauthorized service performed by anyone who is not an authorized Planet Technology USA service specialist (c) a product or a part that has been modified without the written permission of Planet Technology USA; or (d) if any Planet Technology USA serial number has been removed or tampered.
Planet Technology USA warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
- AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period, Planet Technology USA shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase. All products that are replaced become the property of Planet Technology USA. Replacement products may be new or reconditioned. Planet Technology USA does not issue refunds or credit. Please contact the point-of-purchase for their return policies.
Planet Technology USA shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Planet Technology USA pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting Planet Technology USA within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all Planet Technology USA products. Products that are sent to Planet Technology USA for RMA service must have the RMA number marked on the outside of return packages and sent to Planet Technology USA prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE PLANET TECHNOLOGY USA PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT PLANET TECHNOLOGY USA'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PLANET TECHNOLOGY USA NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF PLANET TECHNOLOGY USA'S PRODUCTS.
PLANET TECHNOLOGY USA SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW PLANET TECHNOLOGY USA ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT PLANET TECHNOLOGY USA'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of California.
Some Planet Technology USA products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, PLANET TECHNOLOGY USA SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF PLANET TECHNOLOGY USA CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. NO PLANET TECHNOLOGY USA RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. PLANET TECHNOLOGY USA IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH PLANET TECHNOLOGY USA PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.
Shipping costs of products being returned are the responsibility of the customer. Cost of shipping products back to the customer will be paid by Planet Technology USA (Free ground shipping for USA - domestic customers only. International customers are responsible for shipping costs.) This warranty only applies to the customer whom purchased the product directly from Planet Technology USA.
Out of Warranty Service:
For products which are out of warranty, please call or fax in for a RMA number. Once the products for repair are received a quote will be generated for their repair. Customer approval must be obtained before work is begun in repairing or replacing the products. Once the products are repaired, payments must be made or sent for their repair costs before they are shipped back to customers. Shipping costs both to and from the customer are billed to the Customer for products which are out of warranty.