What is the Difference Between An Ethernet Hub and a Switch?

What is the Difference Between An Ethernet Hub and a Switch?

What is the Difference Between An Ethernet Hub and a Switch?

Ethernet hubs and switches are networking devices that connect computers [and IP devices] together. A hub is basic, offering simple data transmission capabilities to MAC addresses over Layer-1. A switch is complex, offering security, efficiency, intelligent function, and capability to transmit to specific in-network, MAC addresses over Layer-2 and Layer-3.

What are layers 1, 2, and 3?

Layers are the paths over which data is transmitted. The Open Systems Intercommunication (OSI) standards define layers as the model for communication over a network.

Following are the layers over which Ethernet hubs and switches operate in-network functioning. Each device does this by targeting MAC addresses.

OSI-chart: What are layers 1, 2, and 3?

What is a MAC address?

What is a MAC address?MAC stands for Media Access Control. It’s either a 48-bit or 64-bit address given to a network adapter at the time of a computer’s manufacture.

A MAC address is the hardware address for that device. An IP address, on the other hand, is a software address. Both of these can be found in that particular computer’s Network Interface Card (NIC).

These addresses allow both hubs and switches to transmit data to a computer.

Now that you understand the route a signal travels and the address of the computer receiving, let’s look at how hubs and switches transmit to them.

What does an Ethernet hub do?

What does an ethernet hub do?A ethernet Hub connects broadcasts signals to computers within a Local Area Network (LAN) through a process called frame flooding, also known as unicast. It is like one big blast. A Hub does not differentiate between MAC addresses, and indeed cannot. It does not have the software required to identify specific targets.

A hub is essentially an unintelligent device. Each incoming bit is replicated on all other interfaces.

A hub is the easiest and least expensive way to construct a network of personal computers together.

 

One problem with hubs is the unnecessary traffic due to the spammy transmission process. It’s also not secure because it can send data that is not intended for all end-users. A hub generally has 4 to 12 ports.

What does an Ethernet switch do?

What does an ethernet switch do?A switch is an intelligent device, transmitting to specific MAC addresses within the LAN. It has the capability to learn or “remember” and distinguish between specific addresses by accessing them from a CAM table.

Software allows the switch to regulate traffic, eliminating spammy signals and making connected networks highly efficient.

A switch costs more, but it not only supports personal computers but also support a variety of other IP devices. That brings it into the realm of the Internet things and the ability to support remote devices within a larger WAN, VLAN, or LAN.

Intelligent features allow administrators to turn ports off and on, or filter, through specific ports and manage VLAN security. A network switch generally has 24 to 48 ports.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *


[i]
[i]